Contact
Cutter suction dredgers working in a harbour

Dredging, Coastal & Sediment Engineering Consultancy

Independent engineering behind every cubic metre moved and every shoreline protected.

Dredging and coastal works are among the most expensive and environmentally sensitive marine activities. Marine Trex provides independent consultancy that helps owners define what is genuinely required, quantify it accurately, predict its effects and verify that it was delivered.

We bring together bathymetric survey, sediment characterisation, metocean data and numerical modelling to support decisions on channel design depths, maintenance intervals, disposal strategy and shoreline protection. During execution, our supervision and verification surveys give the owner an independent measure of progress, quantities and environmental compliance.

Trailing suction hopper dredger under way

Scope of services

Dredging consultancy

  • Dredging feasibility and technical studies
  • Capital and maintenance dredging engineering consultancy
  • Dredging methodology and dredger suitability assessments
  • Dredging quantity estimation, verification and pay-volume reconciliation
  • Dredging supervision and engineering support
  • Dredged-material disposal and beneficial reuse assessments

Sediment and siltation

  • Pre-dredge seabed and sediment investigations
  • Sediment transport modelling
  • Port siltation prediction and management
  • Dredge plume and turbidity dispersion modelling
  • Environmental monitoring during dredging
  • Bathymetric verification surveys

Coastal and hydrodynamic engineering

  • Numerical wave, current and tidal modelling
  • Breakwater, harbour and coastal hydrodynamic modelling
  • Coastal erosion and shoreline change studies
  • Beach nourishment and coastal protection engineering
  • Shoreline protection concepts: revetments, groynes and breakwaters
Aerial view of a beach with timber groynes and breaking waves
Breakwater armoured with concrete units in surf
Grab crane barge working beside a harbour quay
Dredger working in a harbour channel

How we carry it out

01Quantity engineering

Volumes are computed from surveyed surfaces against design templates with specified tolerances and over-depth allowances, with transparent accounting of pay and non-pay volumes and survey uncertainty.

02Numerical modelling

Hydrodynamic, wave and sediment transport models are set up with site bathymetry and calibrated against measured currents, waves and water levels before simulating siltation, plume dispersion or shoreline evolution.

03Sediment characterisation

Grab and core samples are analysed for particle-size distribution, density and contamination to inform dredgeability, plume behaviour and disposal options.

04Plume & turbidity control

Model predictions are converted into practical turbidity limits and monitoring locations, with real-time monitoring and trigger-action plans during execution.

05Coastal design

Shoreline protection and nourishment options are evaluated for wave climate, sediment budget, constructability and lifecycle cost, using established coastal engineering design manuals.

06Dredger suitability

Soil and rock properties, dredge depth, disposal distance and sea conditions are assessed against the working limits of cutter suction, trailing suction hopper, backhoe and grab dredgers to recommend suitable plant and realistic production rates. Marine Trex provides independent engineering and consultancy and does not operate dredging plant.

Equipment and methods

  • MBES/SBES survey systems for verification
  • Sediment grabs, corers and particle-size analysis (laboratory analysis)
  • Turbidity and suspended-sediment monitoring buoys
  • ADCPs for plume tracking
  • Numerical modelling software for hydrodynamics, waves and sediment transport

Equipment listed describes the technology used to deliver this service. Specific systems are selected for each project's requirements and site conditions.

Specifications and standards

Quantities
Surface-to-template volumes with tolerance and over-depth accounting
Modelling
Calibrated 2D/3D hydrodynamic, spectral wave and sediment transport
Plume criteria
Turbidity thresholds tied to sensitive receptors and trigger levels
Verification
Independent pre-, progress- and post-dredge surveys
Shoreline analysis
Historic shoreline change, sediment budget and design wave climate

Relevant codes, standards & guidance

  • PIANC guidance on channel design, dredging and environmental management
  • CIRIA/CUR/CETMEF Rock Manual (C683)
  • EurOtop manual on wave overtopping
  • USACE Coastal Engineering Manual (EM 1110-2-1100)
  • USACE EM 1110-2-1003 Hydrographic surveying (for dredging measurement)
  • National environmental permitting requirements in each GCC state

The governing standards, survey orders and acceptance criteria are confirmed for each project against the client's specification and the applicable national requirements.

Deliverables

  • Feasibility and options reports
  • Dredging quantity reports and volume reconciliations
  • Modelling reports: siltation, sediment transport, plume
  • Shoreline protection and nourishment design reports
  • Supervision daily and weekly reports
  • Verification survey charts and as-dredged certificates
  • Environmental monitoring and compliance reports

Where it is applied

Ports and harbours
Capital and maintenance dredging studies, siltation prediction and independent quantity verification.
Offshore oil and gas
Dredging and backfill studies for pipeline shore approaches and terminal access channels.
Desalination and power
Intake channel sedimentation studies and assessment of dredging near sensitive intakes.
Marine infrastructure
Shoreline protection, beach nourishment, reclamation and breakwater studies.

Questions and answers

What does a dredging consultant do?

A dredging consultant defines what needs to be dredged and why, estimates quantities from survey data, advises on methods and disposal, predicts siltation and environmental effects, and supervises the works independently of the dredging contractor.

What is dredge plume modelling?

It is numerical modelling of how sediment released during dredging and disposal spreads and settles. Results are used to set turbidity limits, plan monitoring and protect sensitive receptors such as corals, seagrass and seawater intakes.

How are dredging quantities verified?

By comparing pre-dredge and post-dredge hydrographic surveys carried out to an agreed standard, with volumes computed against the design profile and tolerances.

Does Marine Trex carry out the dredging?

No. Marine Trex provides independent engineering and consultancy: feasibility, methodology, quantity verification, modelling, supervision and environmental monitoring. Dredging is carried out by the dredging contractor.

Related expertise