Marine Geotechnical & Seabed Engineering
Ground conditions below the seabed, measured and turned into design parameters.
Foundations, anchors, pipelines, cables and dredged channels all depend on the strength and layering of the ground beneath the seabed. Marine Trex plans and manages marine geotechnical investigations that measure those properties directly, using in-situ testing, drilling and coring matched to the water depth, the expected soils and the engineering question.
Geotechnical work is planned together with the geophysical survey. Sub-bottom profiles show where layers change, and test and sample locations are placed to confirm them. Field and laboratory results are then combined into a ground model with design parameters that foundation, pipeline, cable and dredging engineers can use without further interpretation.
Scope of services
In-situ testing and drilling
- Offshore CPT and CPTu investigations
- Marine boreholes and seabed soil investigations
- Nearshore drilling from jack-up platforms and barges
- Rock coring and rock-head confirmation
- Standard penetration and downhole testing
Seabed sampling
- Vibrocore sampling in sands and mixed sediments
- Gravity core and piston core sampling in soft soils
- Grab and box-core sampling
- Marine sediment investigations and laboratory coordination
- Sample logging, preservation and chain of custody
Engineering assessment
- Seabed geotechnical characterisation and ground models
- Offshore foundation investigations
- Anchor holding capacity assessments
- Pipeline and cable trenchability assessments
- Seabed stability and slope assessments
- Marine geohazard studies
How we carry it out
01Investigation planning
A desk study and the geophysical data set define the expected soil units and hazards. Test types, depths and locations are then selected to confirm each unit and to provide the parameters the design needs, with contingency locations agreed in advance.
02Cone penetration testing
A cone is pushed into the seabed at a constant rate while tip resistance, sleeve friction and pore pressure are recorded continuously. CPTu profiles identify soil type and layering and are correlated to strength and stiffness parameters.
03Drilling and sampling
Where samples or greater depth are required, boreholes are drilled from a jack-up platform, barge or vessel, alternating sampling and in-situ testing. Rock is cored to confirm rock head and quality for piled and dredged works.
04Vibrocore, gravity and piston coring
Vibrocorers recover continuous cores in sands and mixed sediments. Gravity and piston corers are used in soft clays and silts. The method is chosen for the sediment so that recovery is sufficient for logging and testing.
05Laboratory testing
Classification, strength, consolidation, carbonate content and chemical tests are scheduled by the geotechnical engineer and carried out at accredited laboratories. Results are checked against the in-situ data before use.
06Ground model and parameters
Geophysical horizons, CPT profiles, borehole logs and laboratory results are combined into a ground model with characteristic design profiles for foundations, anchors, trenching and slope stability.
Equipment and methods
- Seabed CPT and CPTu systems
- Jack-up platforms and drilling barges for nearshore boreholes
- Rotary drilling rigs with wireline sampling
- Vibrocorers
- Gravity and piston corers
- Grab and box-core samplers
- GNSS and acoustic positioning for test locations
- On-site sample logging and handling facilities
Equipment listed describes the technology used to deliver this service. Specific systems are selected for each project's requirements and site conditions.
Specifications and standards
- In-situ testing
- CPT and CPTu to ISO 22476-1 with pore-pressure measurement
- Coring
- Vibrocore, gravity or piston core selected for sediment type and target depth
- Positioning
- GNSS at the surface, acoustic positioning for seabed frames in deeper water
- Laboratory
- Classification, strength, consolidation and carbonate content at accredited laboratories
- Outputs
- Factual report, interpretive report, ground model and design profiles
Relevant codes, standards & guidance
- ISO 19901-8 Marine soil investigations
- ISO 22476-1 Electrical cone and piezocone penetration test
- ISO 19901-4 Geotechnical and foundation design considerations
- BS 5930 Code of practice for ground investigations
- DNV-RP-C212 Offshore soil mechanics and geotechnical engineering
- Client and authority investigation specifications
The governing standards, survey orders and acceptance criteria are confirmed for each project against the client's specification and the applicable national requirements.
Deliverables
- Investigation specifications and method statements
- CPT and CPTu logs with interpreted soil profiles
- Borehole and core logs with photographs
- Laboratory test schedules and results
- Geotechnical factual reports
- Interpretive reports with design parameters
- Integrated geophysical and geotechnical ground models
- Trenchability, anchor capacity and slope stability assessments
Where it is applied
- Ports and harbours
- Boreholes and CPT for quay walls, piles, breakwaters and dredged channels, including rock-head confirmation.
- Offshore oil and gas
- Soil data for platform foundations, pipeline routes, anchors and jack-up site assessments.
- Renewable energy
- Ground models for wind turbine foundations, floating solar anchors and export cable routes.
- Desalination and power
- Seabed investigation for intake and outfall pipelines, tunnels and marine structures.
Questions and answers
What is the difference between CPT and CPTu?
Both push an instrumented cone into the ground at a constant rate and record tip resistance and sleeve friction. CPTu also measures pore water pressure, which improves the identification of soil type and the assessment of clays and silts.
When is a vibrocore used instead of a borehole?
A vibrocore recovers a continuous sample of the upper few metres of seabed quickly and at low cost, which suits dredging, cable and pipeline routes. Boreholes are used where greater depth, rock coring or undisturbed samples for foundation design are required.
Why combine geophysical and geotechnical surveys?
Geophysical data show the continuity of soil layers between test locations, and geotechnical tests give the properties of each layer. Together they provide a ground model with fewer test locations than geotechnical work alone.
What is a trenchability assessment?
It compares the strength and type of the seabed soils along a pipeline or cable route with the capability of jetting, ploughing and cutting tools, to predict the achievable trench depth and progress rate.
Related expertise
- Hydrographic, Geophysical & Seabed SurveysSub-bottom and bathymetric data define where to test and sample, and geotechnical results calibrate the geophysical interpretation.
- Dredging, Coastal & Sediment Engineering ConsultancySediment and rock properties determine dredgeability, plant selection and reuse options.
- Subsea Power & Telecommunication Cable EngineeringSoil strength along the route controls burial depth, trenching method and cable protection.
- Offshore Renewable EnergyGround models support foundation concept selection and anchor design for offshore energy sites.