Contact
Cable-laying vessel leaving port

Subsea Power & Telecommunication Cable Engineering

Cable routes engineered, surveyed and monitored from landfall to landfall.

Subsea power and telecommunication cables are most often damaged by anchors, fishing gear and seabed movement, and most of that risk is decided by the route and the burial depth. Marine Trex supports cable owners and installers from route selection through to in-service monitoring, with survey, geotechnical and engineering work delivered by one team.

For new cables we investigate the corridor, assess burial risk and trenchability, and study the landfalls. For cables in service we survey depth of burial, monitor exposure and scour, integrate fibre-optic temperature and acoustic sensing, and support fault location when a cable is damaged.

Cross-sections of armoured submarine cable

Scope of services

Route and protection engineering

  • Subsea cable route engineering
  • Cable corridor investigations
  • Cable burial risk assessment
  • Cable trenchability assessments
  • Subsea cable protection engineering
  • Cable landfall studies
  • Cable and pipeline crossing design support

Cable surveys

  • Geophysical and geotechnical cable route surveys
  • Cable depth-of-burial surveys
  • As-laid and as-built cable surveys
  • Cable exposure and seabed scour monitoring
  • Offshore wind export cable survey services
  • Landfall and nearshore topographic and bathymetric surveys

Monitoring and condition

  • Cable condition monitoring
  • Distributed Temperature Sensing (DTS)
  • Distributed Acoustic Sensing (DAS)
  • Fibre-optic monitoring integration
  • Cable fault-location engineering support
  • Repeat surveys and change detection along the route
Cable ship at anchor off a harbour

How we carry it out

01Route selection

Desk study, bathymetry, seabed geology, existing infrastructure, shipping and fishing activity and environmental constraints are combined to compare route options and select a corridor for survey.

02Burial risk assessment

Vessel traffic data and anchor and fishing-gear penetration in the route soils are used to set a target depth of lowering for each section of the route, so that burial effort is concentrated where the risk is highest.

03Trenchability and protection

CPT and core data are assessed against jetting, ploughing and mechanical cutting to confirm that the target depth can be reached. Where burial is not practical, rock placement, mattresses or protective sleeves are specified.

04Landfall studies

Shoreline change, nearshore wave conditions, ground conditions and site access are assessed to compare open-cut and trenchless landfall options and to position the transition point.

05Depth-of-burial survey

Cable tracking systems and sub-bottom profilers carried by an ROV or towed platform measure cable position and cover. Results are reported against the target depth, with exposed and shallow sections listed for remedial work.

06Distributed fibre-optic sensing

DTS measures temperature along an optical fibre in or alongside the cable, which indicates changes in burial and thermal loading. DAS detects vibration along the fibre and can indicate anchor contact, vessel activity or cable movement.

Equipment and methods

  • Multibeam echosounders, side-scan sonars and sub-bottom profilers
  • Magnetometers and gradiometers
  • Cable tracking systems for buried cables
  • Inspection-class ROVs
  • Seabed CPT systems and vibrocorers
  • DTS and DAS interrogator units
  • Nearshore survey launches and uncrewed surface vessels
  • GNSS and acoustic positioning

Equipment listed describes the technology used to deliver this service. Specific systems are selected for each project's requirements and site conditions.

Specifications and standards

Route survey
Bathymetry, seabed features, shallow geology and magnetic targets across the corridor
Burial
Depth of lowering and cover reported against the target for each route section
Landfall
Open-cut and trenchless options compared on ground, wave and access conditions
Fibre sensing
DTS for temperature and DAS for vibration along the cable length
Outputs
Route position lists, alignment charts, burial assessment and survey reports

Relevant codes, standards & guidance

  • ICPC Recommendations for submarine cable planning, crossings and surveys
  • DNV-ST-0359 Subsea power cables for wind power plants
  • DNV-RP-0360 Subsea power cables in shallow water
  • Carbon Trust Cable Burial Risk Assessment Methodology
  • IHO S-44 Standards for Hydrographic Surveys
  • ISO 19901-8 Marine soil investigations

The governing standards, survey orders and acceptance criteria are confirmed for each project against the client's specification and the applicable national requirements.

Deliverables

  • Route desk studies and option assessments
  • Route survey reports and alignment charts
  • Route position lists
  • Cable burial risk assessments
  • Trenchability and burial assessment reports
  • Landfall study reports
  • Depth-of-burial and exposure survey reports
  • Monitoring system specifications and data reports

Where it is applied

Power transmission
Route engineering, landfall studies and burial assessment for island, interconnector and platform power cables.
Telecommunications
Corridor investigation, shore-end surveys and protection engineering for fibre-optic cable systems.
Offshore wind and solar
Export and array cable route surveys, burial verification and thermal monitoring.
Offshore oil and gas
Power and control umbilical routes, crossings with pipelines and periodic exposure surveys.

Questions and answers

What is a cable burial risk assessment?

It is a method for setting the burial depth of a subsea cable from the actual threats along the route, mainly anchors and fishing gear, and the resistance of the seabed soils. The result is a target depth of lowering for each section of the route.

How is the depth of a buried cable measured?

Cable tracking systems detect the cable by its magnetic field or an applied signal, and sub-bottom profilers image it in the sediment. The sensors are carried by an ROV or towed platform, and cover is calculated from the measured cable depth and the seabed level.

What do DTS and DAS measure?

Distributed Temperature Sensing measures temperature along an optical fibre, which helps identify sections where burial or thermal conditions have changed. Distributed Acoustic Sensing measures vibration along the fibre and can indicate anchor contact, vessel activity or cable movement.

What does a landfall study cover?

It assesses shoreline stability, nearshore waves and currents, ground conditions, existing services and access, and compares open-cut trenching with trenchless methods for bringing the cable ashore.

Related expertise