Industrial Marine & Offshore Services
Keeping intakes, outfalls, terminals and platforms in reliable service.
Desalination and power plants across the GCC rely on seawater intakes and outfalls that must deliver flow without interruption. Terminals and platforms rely on marine structures and pipelines that must stay safe through years of service. Marine Trex supports these assets with inspection, cleaning, repair and integrity management delivered by integrated teams of engineers, divers and ROV specialists.
Work is planned with operations, not around them. We understand plant shutdown constraints, permit-to-work systems and the interfaces between marine, mechanical and process teams, and we deliver findings that support maintenance planning and capital decisions.
Scope of services
Seawater systems
- Desalination seawater intake and outfall inspection
- Cooling-water intake and pipeline assessment
- Diffuser and outfall port inspection
- Biofouling assessment and cleaning (mechanical and hydro-jetting)
- Intake screen and velocity cap inspection
Offshore & terminals
- Offshore platform inspections: splash zone, jacket and risers
- Oil and gas terminal and jetty maintenance support
- Underwater pipeline repair: clamps, sleeves and coating reinstatement
- Offshore decommissioning support: surveys, inspection and as-left verification
Asset integrity
- Marine asset integrity management
- Condition assessment and remaining-life evaluation
- Maintenance planning support
How we carry it out
01Intake & outfall inspection
Diver or ROV inspection of intake heads, velocity caps, screens, pipelines and diffuser risers, with internal pipeline inspection where accessible, recording marine growth, sediment accumulation, structural defects and port blockages.
02Biofouling management
Fouling is quantified before cleaning to understand growth rates, then removed by hydro-jetting or mechanical tools with debris management, followed by post-clean verification.
03Underwater repair
Engineered repair clamps, sleeves and composite wraps are specified, installed and documented; coating reinstatement uses underwater-curing systems where appropriate.
04Platform inspection
Splash zone, riser and caisson inspection by rope access interface, diving and ROV, integrated with the platform’s integrity management plan.
05Decommissioning support
Pre-decommissioning surveys, debris and as-left surveys, and verification inspections to support regulatory close-out.
Equipment and methods
- Surface-supplied diving systems
- Inspection and work-class ROV interfaces
- Hydro-jetting and mechanical cleaning tools
- Underwater cameras and laser scaling
- Engineered repair clamps and composite systems
Equipment listed describes the technology used to deliver this service. Specific systems are selected for each project's requirements and site conditions.
Specifications and standards
- Intake assessment
- Marine growth, sediment, structure, screens and velocity caps
- Diffusers
- Port-by-port condition and blockage status
- Cleaning
- Pre- and post-clean imagery and fouling quantification
- Repairs
- Engineered clamps/sleeves with installation records
- Planning
- Aligned to plant shutdown and permit-to-work
Relevant codes, standards & guidance
- IMCA D 014 International Code of Practice for Offshore Diving
- IMCA R 004 ROV code of practice
- ISO 19901-9 Structural integrity management
- DNV-RP-F113 Pipeline subsea repair
- Operator and plant-owner technical specifications
The governing standards, survey orders and acceptance criteria are confirmed for each project against the client's specification and the applicable national requirements.
Deliverables
- Inspection reports with imagery and condition grading
- Biofouling assessment and cleaning reports
- Repair procedures and installation records
- Integrity assessments and remaining-life evaluations
- Maintenance recommendations and schedules
- Decommissioning survey and verification reports
Where it is applied
- Ports and harbours
- Maintenance of jetties, fenders, loading arms and terminal marine structures.
- Offshore oil and gas
- Platform and terminal maintenance support, marine growth removal and topside-to-subsea repair scopes.
- Desalination and power
- Inspection and cleaning of intake heads, screens, pipelines and outfall diffusers, with discharge monitoring.
- Marine infrastructure
- Underwater repair and maintenance of outfalls, cooling-water systems and coastal industrial plant.
Questions and answers
How often should a seawater intake be inspected?
It depends on fouling rates and plant criticality. In warm GCC waters marine growth is rapid, so many operators inspect at least annually and after any loss of flow, with cleaning planned around plant outages.
What is thermal discharge modelling?
It is numerical modelling of how warm cooling water or dense brine disperses from an outfall. It is used to design diffusers, check compliance with mixing-zone limits and confirm that the discharge does not recirculate into the intake.
What are the usual causes of reduced intake flow?
Marine growth on screens and inside pipelines, sediment build-up, jellyfish or seaweed ingress, and damage to intake heads or screens. An inspection identifies which of these applies before cleaning or repair is planned.
Related expertise
- Advanced Subsea Engineering & Asset IntegrityDetailed integrity inspection and assessment support repair decisions.
- Oceanographic, Metocean & Environmental MonitoringThermal and brine plume monitoring around outfalls.
- Cathodic Protection & Subsea Corrosion EngineeringCP retrofit and coating repair for intake and outfall steelwork.
- Marine Environmental & Ecological ConsultancyEcological assessment around intakes and discharge zones.