Contact
Work deck and A-frame of a dive support boat at sea

Fleet

Vessel selection determines how safely and efficiently offshore work is delivered. Each scope is matched to the appropriate vessel class, with qualified crews and equipment on board.

Vessels for every water depth

From launches working in very shallow water to vessels that hold position over a subsea worksite. We mobilise the class each scope requires, and the proposed vessel is specified in our quotation.

Small survey launch working close to shore

Survey launches

Small, shallow-draft boats for harbours, approach channels, intakes and nearshore work, where larger vessels cannot go.

Typical characteristics

  • 7 to 12 m length
  • Draft under about 1 m
  • Hull or pole-mounted echosounders
  • Crane-launched or trailered to site

Used for

  • Port and channel surveys
  • Pre- and post-dredge surveys
  • Intake and outfall inspections
Coastal survey and research vessel at sea

Coastal survey and research vessels

Larger vessels with deck space, A-frames and accommodation for round-the-clock survey and sampling offshore.

Typical characteristics

  • 20 to 60 m length
  • Over-the-side or moon-pool sensor mounts
  • A-frame and winches for towed systems
  • Accommodation for 24-hour working

Used for

  • Geophysical and route surveys
  • Metocean buoy and mooring deployment
  • Environmental sampling campaigns
Red workboat under way in coastal waters

Multicats and workboats

Flat-deck workboats with cranes and winches for lifting, towing and handling moorings close to structures.

Typical characteristics

  • Clear aft deck for equipment
  • Deck crane and anchor winches
  • Shallow draft for inshore work
  • Push and tow capability

Used for

  • Buoy and aids-to-navigation installation
  • Mooring and SPM maintenance
  • Anode retrofits and small marine works
Dive team on the deck of a dive support boat

Dive and ROV support vessels

Vessels that hold position over a worksite while divers or ROVs inspect and repair what is below.

Typical characteristics

  • Dynamic positioning or four-point mooring
  • Surface-supplied dive spread
  • ROV launch and recovery system
  • Deck space for tooling and spares

Used for

  • Jacket, pipeline and riser inspection
  • Intake screen and outfall repairs
  • Subsea CP surveys
Fast support craft under way

Crew transfer and fast support craft

Fast catamarans and support boats that move people, parts and light equipment between shore and offshore sites.

Typical characteristics

  • Catamaran or monohull designs
  • Bow fendering for platform and turbine access
  • Light cargo deck
  • Quick transit between sites

Used for

  • Crew changes and site visits
  • Inspection team transfers
  • Spares and equipment runs
Small uncrewed surface vessel operating near a support ship

Uncrewed surface vessels

Remotely operated or autonomous survey boats for very shallow, confined or hazardous water.

Typical characteristics

  • Under 5 m length
  • Single-beam or compact multibeam payloads
  • Remote or pre-planned operation
  • Launched by hand or small crane

Used for

  • Very shallow and inter-tidal surveys
  • Surveys near operating plant
  • Repeat monitoring lines
Jack-up barge standing on its legs beside a slipway

Jack-up platforms and geotechnical drilling vessels

Stable working platforms for nearshore boreholes and CPT, and vessels equipped for offshore soil investigation.

Typical characteristics

  • Self-elevating legs for shallow water
  • Drilling rig and moon pool or cantilever
  • Deck space for cores and testing
  • Seabed CPT frame handling

Used for

  • Nearshore boreholes and rock coring
  • Offshore CPT and sampling
  • Foundation and dredging investigations
Anchor handling tug supply vessel under way off a port

Anchor handling tugs and utility vessels

Powerful vessels with winches and open decks for moorings, towing and offshore support.

Typical characteristics

  • High bollard pull
  • Anchor-handling winch and stern roller
  • Large clear deck
  • Offshore endurance

Used for

  • SPM and buoy mooring work
  • Towing and positioning of barges
  • Offshore supply and support
Landing craft beached with its bow ramp lowered

Landing craft

Flat-bottomed vessels with a bow ramp that deliver equipment to beaches, islands and unimproved shorelines.

Typical characteristics

  • Bow ramp for vehicles and plant
  • Very shallow draft
  • Open cargo deck
  • Beach landing capability

Used for

  • Coastal and island logistics
  • Shoreline response and clean-up support
  • Nearshore construction support
Floating crane barge with a tug alongside

Crane barges and work pontoons

Floating platforms for lifting, storage and marine works alongside structures and in sheltered water.

Typical characteristics

  • Deck crane or crawler crane
  • Spud legs or anchor spread
  • Large deck load capacity
  • Towed or self-propelled

Used for

  • Buoy and sinker handling
  • Jetty and intake maintenance
  • Platforms for drilling and sampling
Response vessel loading a containment boom reel on deck

Oil spill response vessels

Vessels and workboats equipped to deploy booms, recover oil and support shoreline protection.

Typical characteristics

  • Boom reels and skimmers
  • Recovered-oil storage
  • Workboat for boom towing
  • Dispersant spray arms where permitted

Used for

  • Containment and recovery
  • Protection booming of intakes and harbours
  • Exercises and standby cover

Spreads we mobilise

Vessels are one part of the operation. The following equipment spreads are mobilised with the specialists who operate them.

Technology and equipment
  • ROV spreads

    Observation and light work-class ROVs with launch systems, tooling and inspection sensors.

  • Survey spreads

    Multibeam, side-scan and sub-bottom systems with positioning, motion and sound-velocity sensors.

  • Dive spreads

    Surface-supplied diving systems with inspection, measurement and cleaning equipment.

  • Metocean and monitoring

    Wave buoys, ADCPs, water-quality sondes and telemetry for short and long-term deployments.

  • Geotechnical spreads

    Seabed CPT systems, vibrocorers, gravity and piston corers and drilling rigs with sample handling.

  • Environmental sampling

    Water samplers, sediment grabs, drop cameras, hydrophones and eDNA and plankton sampling sets.

  • Oil spill response equipment

    Containment booms, skimmers, temporary storage, sorbents and shoreline clean-up equipment.

  • Aids to navigation

    Navigation buoys, lanterns, AIS AtoN units, mooring chain and sinkers ready for installation.

How we choose a vessel

Vessel selection is an engineering decision. We assess six factors before proposing a vessel for any campaign.

  • Water depth and access

    Draft, air draft and manoeuvrability decide what can safely reach the site.

  • Sea state and season

    Vessel size and motion limits are matched to the weather window, including the summer shamal and the south-west monsoon.

  • Deck and lifting

    Deck area, crane capacity and power must suit the equipment going on board.

  • Station keeping

    Dynamic positioning, mooring or anchoring, chosen for the work near live assets.

  • Crew and endurance

    Berths, transit time and fuel endurance for the length of the campaign.

  • Permits and compliance

    Flag, class and local marine permits checked before mobilisation in each country.