Contact
Gas carrier berthed at a coastal LNG terminal

Port & Terminal Engineering

Berths, moorings and channels engineered and monitored for safe, efficient operation.

A port or terminal is productive when vessels can arrive, berth, stay moored and depart safely in the conditions the site actually experiences. Marine Trex provides the engineering and monitoring behind those operations: analysis of berthing and mooring loads, assessment of fenders, bollards and hooks, and instrumentation that shows how the berth and its structures are performing.

The work connects directly to our survey, metocean and monitoring services. Measured waves, currents, water levels and sedimentation feed mooring analysis, operability studies and channel design, and installed sensors provide a long-term record for quay walls, jetties and the seabed in front of them.

Mooring lines made fast to a quay bollard

Scope of services

Berthing and mooring

  • Berthing and mooring analysis
  • Mooring load monitoring systems
  • Quick-release hook systems and condition monitoring
  • Smart berthing assistance systems
  • Fender system engineering and condition assessments
  • Bollard capacity engineering and load monitoring

Structures and seabed

  • Quay wall and jetty structural monitoring
  • Port and harbour sedimentation monitoring
  • Port seabed obstruction surveys
  • Berth scour assessment from propeller and thruster wash
  • Long-term port infrastructure monitoring

Navigation and operability

  • Navigation channel optimisation
  • Port operability studies
  • Marine traffic and navigation risk assessments
  • Under-keel clearance and tidal window assessment

Digital port systems

  • Port digital twins
  • Smart port sensor integration
  • Environmental and metocean displays for marine operations
  • Integrated port monitoring dashboards
Container ship under ship-to-shore cranes at a terminal
Tug in the approach to a container port
Tugs escorting a bulk carrier through a channel

How we carry it out

01Mooring analysis

Vessel motions and line and fender loads are calculated for the design vessels under wind, wave and current loading, including passing-vessel effects where relevant. Results define safe mooring arrangements and operating limits for the berth.

02Berthing energy and fenders

Berthing energy is calculated for the vessel range and approach conditions and compared with fender capacity and hull pressure limits. Existing fenders are inspected and assessed for remaining performance.

03Mooring and bollard load monitoring

Load-measuring pins or cells on quick-release hooks and bollards show line tensions in real time, with alarms for high or uneven loads. Records support incident review and confirmation of design assumptions.

04Berthing assistance

Laser or radar sensors measure the distance, speed and angle of an approaching vessel and display them to the pilot and jetty operator, with metocean data shown alongside.

05Structural monitoring

Settlement, tilt, crack width, vibration and corrosion sensors are installed at selected locations on quay walls and jetties. Trends are reviewed against thresholds agreed with the structure owner.

06Channel, operability and navigation risk

Channel width, depth and alignment are checked for the design vessels. Operability is estimated from metocean statistics and operating limits, and navigation risk is assessed from vessel traffic data and hazard identification with port stakeholders.

Equipment and methods

  • Mooring load monitoring systems for hooks and bollards
  • Quick-release mooring hooks with remote release
  • Laser and radar berthing aid systems
  • Inclinometers, settlement sensors, crack gauges and accelerometers
  • Multibeam echosounders for berth and channel surveys
  • Wave, current, tide and wind sensors
  • AIS data for vessel traffic analysis
  • Monitoring dashboards and data platforms

Equipment listed describes the technology used to deliver this service. Specific systems are selected for each project's requirements and site conditions.

Specifications and standards

Mooring analysis
Line and fender loads for design vessels under wind, wave and current
Load monitoring
Real-time line tension at hooks or bollards with alarm thresholds
Berthing aid
Approach distance, speed and angle displayed to pilot and jetty operator
Structural monitoring
Settlement, tilt, crack width and vibration against agreed thresholds
Outputs
Analysis reports, operating limits, monitoring records and risk assessments

Relevant codes, standards & guidance

  • OCIMF Mooring Equipment Guidelines (MEG4)
  • PIANC guidelines for the design of fender systems
  • PIANC Report 121 Harbour approach channels design guidelines
  • BS 6349 Maritime works
  • IALA guidance on risk management for waterways
  • Port authority and terminal operator requirements

The governing standards, survey orders and acceptance criteria are confirmed for each project against the client's specification and the applicable national requirements.

Deliverables

  • Berthing and mooring analysis reports
  • Berth operating limits and mooring arrangement drawings
  • Fender and bollard assessment reports
  • Monitoring system specifications and commissioning records
  • Structural monitoring reports with trend analysis
  • Sedimentation and obstruction survey reports
  • Port operability and downtime studies
  • Navigation risk assessments

Where it is applied

Container and bulk ports
Operability, channel and berth studies for larger vessels, with sedimentation and structural monitoring.
Oil, gas and LNG terminals
Mooring analysis, hook load monitoring and berthing aid systems for tanker berths and jetties.
Power and desalination plants
Jetty and intake structure monitoring and berth assessments for fuel and material deliveries.
Port authorities
Navigation risk assessments, channel optimisation and long-term infrastructure monitoring.

Questions and answers

What does a mooring analysis determine?

It calculates vessel motions and the loads in mooring lines and fenders under wind, wave and current, and checks them against line, hook, bollard and fender capacities. The outcome is a safe mooring arrangement and operating limits for the berth.

How does a mooring load monitoring system work?

Load-measuring pins or cells in the quick-release hooks or bollards measure the tension in each line. The values are displayed in the control room and on portable units, with alarms when a line is overloaded or slack.

What is a berthing aid system?

Sensors on the jetty measure the distance, approach speed and angle of the vessel during berthing and display them on a large board or handheld unit, so the pilot can keep within the limits of the fenders and structure.

What is a port operability study?

It estimates how often vessels can enter, berth and work cargo by comparing long-term wave, wind, current and water-level statistics with the operating limits of the vessels, tugs and berth.

Related expertise