Contact
Floating offshore wind turbine at sea

Offshore Renewable Energy

Resource, site and asset data for the GCC’s emerging offshore energy sector.

As GCC energy strategies diversify, offshore and nearshore renewables (wind, floating solar and marine energy) require the same rigour of site data that oil and gas has relied on for decades. Marine Trex provides the measurement, survey and engineering support that takes a renewable energy project from resource assessment to operation.

Our integrated approach means wind resource, metocean, geophysical and environmental data can be acquired in coordinated campaigns, sharing vessels and weather windows while producing datasets designed to work together in design and financing studies.

Offshore wind turbine foundations being transported by sea

Scope of services

Resource assessment

  • Offshore wind-resource and metocean studies
  • Floating LiDAR system deployment and data management
  • Tidal-current resource assessments
  • Wave-energy monitoring

Site and asset engineering

  • Offshore geotechnical investigations
  • Offshore foundation and cable-route engineering
  • Subsea cable route surveys and inspection
  • Cable burial and exposure assessment
  • Offshore wind structural and scour monitoring
  • Offshore energy environmental studies

Floating solar

  • Floating solar mooring and anchoring studies
  • Floating solar engineering support
  • Water-body bathymetry and metocean characterisation

New marine technologies

  • Autonomous survey vessels
  • Advanced oceanographic sensor networks
  • Remote data platforms for offshore energy sites
Offshore wind turbines and a substation platform
Service vessel passing an offshore wind farm

How we carry it out

01Floating LiDAR campaigns

Deployment, mooring, servicing and data QC of floating LiDAR systems, with data availability monitoring and validation against reference measurements in line with recognised industry roadmaps.

02Integrated site characterisation

Geophysical survey of foundation and cable corridors, seabed sampling and environmental baseline acquired in a coordinated programme.

03Cable inspection

Depth-of-burial, exposure and free-span surveys using ROV, AUV or towed sensors, with comparison against design burial requirements.

04Floating solar support

Bathymetry, wind and wave assessment and mooring concept support for floating PV on reservoirs, lagoons and sheltered coastal waters.

Equipment and methods

  • Floating LiDAR systems
  • Met masts and wind sensors (coastal)
  • Directional wave buoys and ADCPs
  • MBES, SSS, SBP and magnetometers
  • Cable trackers and ROV/AUV platforms

Equipment listed describes the technology used to deliver this service. Specific systems are selected for each project's requirements and site conditions.

Specifications and standards

Wind data
Wind speed and direction profiles at hub-relevant heights
Availability
Data availability tracked against campaign targets
Foundations
Geophysical ground model supporting geotechnical planning
Cables
Burial depth and exposure vs design requirements
Metocean
Joint wind–wave–current statistics for design

Relevant codes, standards & guidance

  • Carbon Trust Offshore Wind Accelerator roadmap for floating LiDAR
  • IEC 61400 series (wind energy generation systems)
  • DNV-ST-0126 Support structures for wind turbines
  • DNV-RP-0360 Subsea power cables in shallow water
  • ISO 19901-1 metocean considerations
  • IHO S-44 for survey deliverables

The governing standards, survey orders and acceptance criteria are confirmed for each project against the client's specification and the applicable national requirements.

Deliverables

  • Wind and metocean campaign reports
  • Validated LiDAR and metocean datasets
  • Site characterisation and geophysical reports
  • Cable route and burial assessment reports
  • Floating solar site and mooring support reports

Where it is applied

Ports and harbours
Assessment of port access, depths and laydown areas for renewable construction and maintenance bases.
Offshore oil and gas
Site data for electrification of offshore facilities with wind or floating solar.
Desalination and power
Resource and site studies for renewable supply to coastal plants.
Marine infrastructure
Seabed, metocean and environmental data for foundations, moorings and export cables.

Questions and answers

What surveys are needed before an offshore wind project?

Wind resource measurement, a metocean campaign for waves, currents and water levels, geophysical and geotechnical surveys for foundations and cable routes, and environmental baseline surveys for consenting.

What is floating LiDAR?

A buoy-mounted LiDAR that measures wind speed and direction at several heights across the turbine rotor, used in place of a fixed offshore met mast for wind resource assessment.

How long is wind normally measured?

At least 12 months, so that seasonal variation is captured, with the record then correlated against long-term reference data.

Related expertise