Advanced Subsea Engineering & Asset Integrity
Engineering diagnostics and condition evidence for every submerged asset.
Subsea assets are inspected to answer one question: is the structure fit for continued service, and if not, what has to happen and when? Marine Trex plans inspection campaigns around that question, combining ROV, AUV and diving methods with engineering assessment so that each anomaly is located, measured, graded and linked to an integrity decision.
We work across jackets and topsides splash zones, subsea pipelines and risers, jetties and quay walls, intake structures and mooring systems. Inspection data are referenced to a consistent asset model so that findings from successive campaigns can be compared and trended, and increasingly visualised as a subsea digital twin.
Scope of services
Inspection platforms
- ROV inspection: observation and inspection-class systems
- AUV inspection and survey for long pipelines and wide areas
- Commercial diving: surface-supplied air diving for inspection and light intervention
- Uncrewed surface vessels for shallow-water inspection
Structural condition assessment
- General and close visual inspection (GVI/CVI)
- Riser, conductor and underwater structural condition assessment
- Wall-thickness and flooded-member checks where the integrity plan requires them
- Marine growth thickness and coverage assessment
- ROV-based cathodic protection potential surveys
- Structural integrity surveys and anomaly grading
Pipelines and seabed interaction
- Subsea pipeline free-span detection and assessment
- Subsea pipeline stability engineering
- Seabed scour and pipeline exposure monitoring
- Offshore foundation scour assessment
- Subsea leak detection technology
Mapping, monitoring and digital twins
- Advanced underwater 3D mapping by photogrammetry, laser and sonar
- Subsea digital twins and inspection data management
- Subsea structural monitoring using installed sensors
- Repeat surveys and change detection
How we carry it out
01Risk-based inspection planning
Inspection scopes and intervals are derived from the asset’s structural integrity management strategy, prioritising critical members, nodes and pipeline sections by consequence and likelihood of failure.
02Visual & dimensional
HD video and stills with scaled overlays; laser scaling and photogrammetry generate measurable 3D models for dents, damage, scour and marine growth.
03Condition measurement
Where the integrity plan calls for measured data, wall thickness, member flooding and crack indications are checked at selected locations after cleaning. These measurements are used as diagnostic inputs to the engineering assessment and are not offered as a stand-alone testing service.
04Pipeline survey
ROV-mounted multibeam, profilers and cameras measure pipeline position, burial, span length and gap height, compared against allowable span criteria from engineering assessment.
05Digital twin integration
Findings are tagged to the asset model with location, severity and imagery so engineers can query condition history, plan repairs and reassess inspection intervals.
06Free-span and stability assessment
Measured span lengths and gaps are screened against allowable criteria for static loading and vortex-induced vibration. On-bottom stability is checked for the design wave and current conditions, and rectification options such as supports, rock placement or mattresses are compared.
07Leak detection
Suspected leaks are located with a combination of visual survey, fluorescent dye and hydrocarbon sensors, passive acoustic detection and temperature measurement, selected for the product and the water depth.
Equipment and methods
- Observation and inspection-class ROVs with tooling skids
- AUVs with sonar and camera payloads
- Surface-supplied diving systems with hot-water and comms where required
- Stereo and laser-scaled camera systems
- ROV-mounted multibeam and pipe trackers
- Imaging sonar and subsea laser scanners
- Leak detection sensors: fluorometers, hydrocarbon sensors and passive acoustics
- Wall-thickness and flooded-member measurement tools
Equipment listed describes the technology used to deliver this service. Specific systems are selected for each project's requirements and site conditions.
Specifications and standards
- Inspection levels
- GVI, CVI and measured condition checks per the structural integrity management plan
- Leak detection
- Visual, dye, hydrocarbon sensor and passive acoustic methods
- Pipeline stability
- On-bottom stability checked for design wave and current loading
- Free spans
- Span length and gap measured against allowable criteria
- Photogrammetry
- Scaled 3D models for measurement and change detection
Relevant codes, standards & guidance
- ISO 19902 / API RP 2A: fixed steel offshore structures
- ISO 19901-9 Structural integrity management
- DNV-RP-F116 Integrity management of submarine pipeline systems
- DNV-RP-F105 Free spanning pipelines
- IMCA D 014 International Code of Practice for Offshore Diving
- IMCA R 004 Code of practice for the safe and efficient operation of ROVs
- DNV-RP-F109 On-bottom stability design of submarine pipelines
The governing standards, survey orders and acceptance criteria are confirmed for each project against the client's specification and the applicable national requirements.
Deliverables
- Inspection work packs and dive/ROV task plans
- Anomaly registers with severity grading
- Annotated video, stills and 3D models
- Condition measurement records
- Free-span and scour assessment reports
- Structural integrity summaries and repair recommendations
- Digital twin data packages
- Pipeline stability and rectification assessments
- Leak survey reports
Where it is applied
- Ports and harbours
- Underwater inspection of quay walls, piles, fenders and scour protection for condition assessment and repair planning.
- Offshore oil and gas
- Jacket, riser, conductor, pipeline and SPM inspection to support structural integrity management and life extension.
- Desalination and power
- Intake heads, screens, tunnels and outfall diffusers inspected for fouling, sedimentation and damage.
- Marine infrastructure
- Bridge piers, breakwater toes, cables and outfalls inspected after construction and after storms.
Questions and answers
When is an ROV used instead of divers?
ROVs are preferred for deeper water, long pipeline runs, confined or hazardous locations and extended bottom time. Divers remain effective for hands-on tasks such as detailed measurement, cleaning and repairs in shallower water. Many scopes combine both.
What are GVI and CVI?
General visual inspection (GVI) is an overall survey to find obvious damage, debris and anomalies. Close visual inspection (CVI) is a detailed examination of a specific component, normally after cleaning, to assess defects such as cracks or corrosion.
What is a pipeline free span and why does it matter?
A free span is a length of pipeline that is no longer supported by the seabed, usually because of scour or uneven ground. Long spans can overstress the pipe or vibrate in currents, so span length and gap are measured and compared with allowable limits, and supports or rock placement are designed where needed.
How are subsea leaks located?
Methods include visual survey by ROV, fluorescent dye with a fluorometer, hydrocarbon sensors, passive acoustic detection and temperature measurement. The method is chosen for the product, the pressure and the water depth.
How is a subsea pipeline inspected?
An ROV or towed system follows the pipeline to record its position, burial depth, free spans, coating and weight-coat damage, anode condition, CP potentials and any debris or third-party crossings.
Related expertise
- Cathodic Protection & Subsea Corrosion EngineeringCP potentials and anode condition are recorded in the same ROV or diver campaign.
- Hydrographic, Geophysical & Seabed SurveysRoute and site surveys locate spans, debris and scour before close inspection.
- Industrial Marine & Offshore ServicesInspection findings flow directly into cleaning, repair and maintenance scopes.
- Specialized Marine Monitoring & TechnologyPermanent sensors extend periodic inspection into continuous structural monitoring.