Oil Spill Response & Pollution Survey
Preparedness before an incident, practical support during it and evidence after it.
GCC waters carry some of the heaviest tanker traffic in the world and host offshore fields, export terminals, single point moorings and the desalination intakes that supply the region with drinking water. A spill that reaches an intake or a sensitive shoreline quickly becomes a national issue.
Marine Trex helps operators and authorities prepare for spills, supports them on the water and along the shore when an incident happens, and provides the survey, sampling and environmental evidence needed to close it out. Because the same team handles metocean data, environmental baselines and subsea inspection, response decisions are based on measured conditions rather than assumptions.
Scope of services
Preparedness
- Oil spill risk assessment and trajectory modelling
- Tiered oil spill contingency plans for ports, terminals and facilities
- Coastline, intake and habitat sensitivity mapping
- Response equipment selection, supply and maintenance
- Training, drills and exercises
Response support
- On-water containment and recovery with booms and skimmers
- Protection booming of intakes, marinas and sensitive shorelines
- Shoreline clean-up assessment and clean-up support
- Oily waste segregation, temporary storage and handling plans
- Mobilisation of response vessels, crews and equipment
Surveillance & survey
- Drone and aerial surveillance of slick extent
- Spill tracking with drifters, current and wind data
- Water, sediment and shoreline sampling for hydrocarbon analysis
- Subsea checks of pipelines, SPMs and hoses to locate the source
After the spill
- Post-spill environmental assessment
- Recovery monitoring of shorelines and habitats
- Clean-up sign-off support with authorities
- Incident documentation for reporting and claims
How we carry it out
01Risk and trajectory modelling
Credible spill scenarios are modelled with regional current, wind and tide data to show where oil could go, how fast it could arrive and which intakes and shorelines are most exposed.
02Contingency planning
Plans follow the tiered response approach and are aligned with the national contingency plan of the country concerned, with clear roles, notification routes and equipment call-off.
03Containment and recovery
Boom configuration, skimmer type and storage capacity are matched to oil type, sea state and current speed, with protection booming prioritised for intakes and sensitive sites.
04Shoreline assessment and clean-up
Shorelines are divided into segments, oiling is assessed and recorded, and clean-up methods and end points are agreed so that work stops when further cleaning would do more harm than good.
05Surveillance and sampling
Drone imagery is classified using a recognised oil appearance code, and samples are taken under chain of custody so results stand up to regulators and claims review.
06Post-spill assessment
Results are compared with pre-spill baselines where they exist, and recovery is monitored until agreed end points are met.
Equipment and methods
- Inshore and offshore containment booms
- Weir, oleophilic and disc skimmers
- Temporary storage tanks and bladders
- Sorbents and shoreline clean-up equipment
- Drones with visual and thermal cameras
- Satellite-tracked drifter buoys
- Water and sediment sampling kits
- Spill trajectory modelling software
Equipment listed describes the technology used to deliver this service. Specific systems are selected for each project's requirements and site conditions.
Specifications and standards
- Response tiers
- Tier 1 local, Tier 2 regional and Tier 3 national or international, following the IMO tiered approach
- Shoreline assessment
- Segment-based assessment with agreed clean-up end points
- Surveillance
- Drone and aerial imagery classified to a recognised oil appearance code
- Sampling
- Chain-of-custody sampling for hydrocarbon analysis and source identification
- Exercises
- Desktop, equipment deployment and full-scale exercises with lessons-learned reporting
Relevant codes, standards & guidance
- IMO OPRC Convention (1990) and OPRC-HNS Protocol
- IMO manuals on oil pollution preparedness and response
- IPIECA-IOGP oil spill response good practice guides
- Bonn Agreement Oil Appearance Code
- ITOPF technical information papers
- Kuwait Regional Convention and MEMAC arrangements (Arabian Gulf and Gulf of Oman)
- PERSGA regional arrangements (Red Sea)
- National oil spill contingency plans of Oman, Saudi Arabia, the UAE and Qatar
The governing standards, survey orders and acceptance criteria are confirmed for each project against the client's specification and the applicable national requirements.
Deliverables
- Oil spill risk assessments and trajectory studies
- Oil spill contingency plans
- Sensitivity maps
- Equipment lists and maintenance records
- Exercise reports and lessons learned
- Daily response situation reports
- Shoreline assessment and clean-up sign-off records
- Sampling results and post-spill environmental reports
Where it is applied
- Ports and harbours
- Tier 1 plans, equipment and exercises for bunkering, cargo handling and vessel incidents inside port limits.
- Offshore oil and gas
- Risk assessment, contingency planning and response support for platforms, pipelines and SPM terminals.
- Desalination and power
- Intake protection plans, early-warning monitoring and protection booming to keep oil out of seawater intakes.
- Marine infrastructure
- Shoreline sensitivity mapping and clean-up planning for marinas, beaches and coastal developments.
Questions and answers
What are Tier 1, Tier 2 and Tier 3 oil spill responses?
Tier 1 covers small spills handled with resources held at the facility. Tier 2 covers larger spills needing regional or mutual-aid resources. Tier 3 covers major spills needing national or international support.
What should an oil spill contingency plan contain?
Spill scenarios and risk assessment, sensitivity maps, response strategies, roles and notification procedures, equipment inventories, waste management arrangements and a training and exercise programme, aligned with the national contingency plan.
How is a desalination intake protected during a spill?
Through early warning from surveillance and trajectory forecasts, protection and deflection booming around the intake, water-quality monitoring at the intake, and agreed criteria for reducing or stopping abstraction.
How is shoreline oiling assessed?
The shoreline is divided into segments and surveyed systematically to record the extent, thickness and character of the oil, so that clean-up methods and end points can be agreed for each segment.
Related expertise
- Oceanographic, Metocean & Environmental MonitoringCurrent, wind and wave data drive trajectory modelling and response planning.
- Marine Environmental & Ecological ConsultancyEnvironmental baselines and habitat surveys define sensitivities and measure recovery.
- Advanced Subsea Engineering & Asset IntegrityROV and diving inspection locate and assess the source on pipelines and SPMs.
- Marine Advisory, Assurance & Project ManagementReadiness reviews and project management for response programmes.
- Specialized Marine Monitoring & TechnologyHydrocarbon sensors and smart buoys provide early warning at intakes and terminals.