Contact
Technicians preparing an ADCP current profiler for deployment

Specialized Marine Monitoring & Technology

Continuous, connected insight into structures, pipelines and the sea around them.

Periodic inspection captures a moment; monitoring captures behaviour. Marine Trex designs and integrates monitoring systems that measure what matters continuously: strain, motion, corrosion, leaks, noise, turbidity, mooring loads and seabed movement — and turn those measurements into alerts and decisions.

We focus on end-to-end reliability: selecting sensors for the marine environment, protecting them from fouling and damage, engineering power and communications, and delivering data to dashboards and asset management systems where operators and engineers can act on it.

Uncrewed survey vessel working near offshore wind turbines

Scope of services

Offshore infrastructure monitoring

  • Subsea pipeline movement and exposure
  • Cathodic protection performance
  • Offshore foundation scour
  • Structural vibration and inclination
  • Mooring-line tension
  • Anchor movement
  • Navigation buoy position and operational status
  • Jetty settlement and structural movement
  • Berthing loads and vessel approach conditions

Environmental sensor networks

  • Water-quality and turbidity sensor networks
  • Underwater noise monitoring
  • Pipeline leak detection
  • Real-time industrial discharge monitoring
  • Automated environmental alerts

Digital marine monitoring

  • Smart buoys
  • Marine IoT platforms
  • Real-time offshore sensor networks
  • Satellite and cellular telemetry
  • Remote monitoring dashboards
  • Long-term marine data acquisition and analysis
  • Predictive asset monitoring
  • Integrated marine data management
Hydrophone node prepared on deck before deployment
Hydrophone node being lowered into the sea

How we carry it out

01Monitoring design

Defining what is measured, where, how often and with what accuracy, based on the decisions the data must support and the failure modes of the asset.

02Sensor integration

Selecting and integrating sensors (strain gauges, inclinometers, load cells, corrosion probes, hydrophones, turbidity and leak sensors) with marine-grade housings, anti-fouling and cabling.

03Power & telemetry

Solar, battery and shore power design; data transmission via cable, acoustic modem, radio, cellular or satellite with buffering for outages.

04Data platforms

Ingestion, QC, storage and visualisation in web dashboards with thresholds, alarms and API integration to client systems.

05Analytics

Trend analysis, anomaly detection and condition-based maintenance triggers to move from fixed-interval to predictive maintenance.

Equipment and methods

  • Smart buoys and data buoys
  • Strain, tilt and acceleration sensors
  • Mooring load cells
  • Corrosion and CP monitoring sensors
  • Hydrophones and noise loggers
  • Turbidity and water-quality sensors
  • Leak detection sensors
  • Acoustic modems and telemetry units

Equipment listed describes the technology used to deliver this service. Specific systems are selected for each project's requirements and site conditions.

Specifications and standards

Architecture
Sensors → edge logger → telemetry → cloud → dashboard/API
Alerts
Configurable thresholds with SMS/email notification
Resilience
Local buffering and redundant power for continuity
Integration
API and file exports for asset management systems
Data
QC-flagged time series with full traceability

Relevant codes, standards & guidance

  • ISO 19901-9 Structural integrity management
  • ISO 13374 Condition monitoring data processing
  • Client cybersecurity and IT/OT integration requirements
  • Relevant sensor calibration standards

The governing standards, survey orders and acceptance criteria are confirmed for each project against the client's specification and the applicable national requirements.

Deliverables

  • Monitoring system design documents
  • Installation and commissioning reports
  • Live dashboards and alerting
  • Periodic monitoring reports
  • Trend and predictive maintenance reports
  • Data exports and API access

Where it is applied

Ports and harbours
Real-time wave, tide and current displays, berth mooring load monitoring and turbidity alarms during dredging.
Offshore oil and gas
Structural, CP and mooring monitoring to support integrity management between inspections.
Desalination and power
Continuous intake water-quality monitoring with alarms for turbidity, hydrocarbons and algal blooms.
Marine infrastructure
Settlement, scour and movement monitoring of breakwaters, quay walls and bridges.

Questions and answers

What is the difference between inspection and monitoring?

Inspection records the condition of an asset at one point in time. Monitoring measures behaviour continuously, so trends and sudden changes are seen between inspections and maintenance can be planned on evidence.

What can be monitored on an offshore structure?

Commonly strain, motion and vibration, cathodic protection potential and current, mooring line tension, scour, leaks, and the waves, currents and wind acting on the structure.

How is data sent from offshore sensors?

By cellular or radio links near shore, satellite further offshore, and acoustic modems or cables from subsea sensors to a surface gateway. Data is then displayed on a dashboard with alarms set against agreed thresholds.

What can be monitored remotely on a marine asset?

Typical measurements include mooring-line tension, structural vibration and inclination, settlement, scour depth, cathodic protection potential, buoy position and lantern status, together with waves, currents and water quality at the site.

Related expertise