Contact
Technician deploying a wave and weather buoy from a small boat

Oceanographic, Metocean & Environmental Monitoring

Waves, currents, tides and water quality, measured and delivered in a usable form.

Design criteria, operational limits and environmental compliance all rest on measured ocean data. Marine Trex designs and runs metocean and water-quality campaigns that capture the conditions engineers and regulators actually need: extreme and operational waves, current profiles through the water column, tidal levels, wind and atmospheric conditions, and the physical and chemical state of the water.

Campaigns range from short deployments supporting a construction window to multi-year monitoring networks with real-time telemetry. We handle mooring design, instrument configuration, deployment and recovery, servicing, data QC and analysis, so clients receive validated datasets and the statistics derived from them.

Orange subsurface mooring floats and instrument frames on deck

Scope of services

Oceanographic monitoring

  • Wave height, direction and period
  • Current speed and direction: seabed, buoy and vessel-mounted ADCP
  • Tide and sea-level monitoring
  • Storm surge measurement and analysis
  • Ocean temperature and salinity
  • CTD profiling
  • Offshore marine weather monitoring

Water-quality monitoring

  • Turbidity and suspended sediments
  • Dissolved oxygen
  • pH and conductivity
  • Chlorophyll and algal activity
  • Hydrocarbon indicators
  • Nutrient monitoring
  • Real-time industrial discharge monitoring
  • Thermal and brine discharge plume monitoring

Seabed and coastal monitoring

  • Seabed erosion and sedimentation
  • Scour monitoring around marine structures
  • Seabed movement and displacement
  • Shoreline erosion and coastal change
  • Bathymetric change detection
  • Dredging environmental monitoring

Data systems

  • Real-time monitoring and remote telemetry (cellular, radio, satellite)
  • Underwater acoustics and ambient noise measurement
  • Data QC, gap analysis and validation
  • Metocean statistics and design criteria reporting
CTD frame entering the water beside a vessel
CTD rosette recovered to the deck

How we carry it out

01Campaign design

Instrument location, sampling regime and duration are selected against the engineering purpose: operational statistics, extreme value analysis, model calibration or regulatory compliance. Redundancy is built in for critical parameters.

02Mooring & frame engineering

Seabed frames, trawl-resistant mounts and surface buoy moorings are designed for site depth, current and wave loading, with acoustic release or diver recovery as appropriate.

03Instrument configuration

ADCP bin size, ensemble interval and wave burst settings, CTD sampling rates and sensor anti-fouling are configured to balance resolution, battery life and memory for the service interval.

04Quality control

Data are screened for sensor drift, biofouling, tilt and side-lobe contamination, and compared against reference measurements and grab samples. Every flagged value is traceable in the delivered dataset.

05Analysis

Wave spectra and directional statistics, current roses and profiles, harmonic tidal analysis, exceedance tables, joint probability and extreme value analysis for design criteria.

06Seabed and coastal change

Repeat bathymetric and shoreline surveys are compared on a common datum to quantify erosion, accretion and scour. Fixed sensors such as scour monitors and altimeters fill the periods between surveys.

Equipment and methods

  • Directional wave buoys
  • Acoustic Doppler current profilers (ADCP) and point current meters
  • Pressure and radar tide gauges
  • Automatic marine weather stations
  • CTD profilers and multi-parameter sondes
  • Turbidity, DO, pH and fluorescence sensors
  • Hydrophones and acoustic recorders
  • Telemetry modems: cellular, UHF/VHF radio, satellite

Equipment listed describes the technology used to deliver this service. Specific systems are selected for each project's requirements and site conditions.

Specifications and standards

Wave parameters
Hs, Hmax, Tp, Tz, mean and peak direction, directional spectra
Current profiling
Full water-column velocity profiles with configurable bin size
Tidal analysis
Harmonic constituents and datum levels from water-level records
Water quality
Temperature, salinity, turbidity (NTU/FNU), DO, pH, conductivity
Telemetry
Near real-time via cellular, radio or satellite to web dashboards

Relevant codes, standards & guidance

  • ISO 19901-1 Metocean design and operating considerations
  • DNV-RP-C205 Environmental conditions and environmental loads
  • IOC/UNESCO and WMO guidance for ocean and marine meteorological observation
  • ISO 5667 series (water quality sampling)
  • National environmental agency monitoring requirements in each GCC state

The governing standards, survey orders and acceptance criteria are confirmed for each project against the client's specification and the applicable national requirements.

Deliverables

  • Campaign plans and mooring designs
  • Deployment, service and recovery reports
  • Quality-controlled datasets in agreed formats
  • Monthly and campaign metocean reports
  • Design criteria and extreme value analysis reports
  • Water-quality compliance reports
  • Live dashboards with alerting

Where it is applied

Ports and harbours
Wave, current and tide data for berth downtime studies, mooring analysis and real-time port operations.
Offshore oil and gas
Design and operational metocean criteria for platforms, pipelines and marine operations.
Desalination and power
Temperature, salinity and current data for recirculation studies and for brine and thermal plume monitoring.
Marine infrastructure
Baseline and construction-phase monitoring of turbidity and water quality for coastal works.

Questions and answers

What does an ADCP measure?

An acoustic Doppler current profiler measures current speed and direction at many depths at once using the Doppler shift of sound scattered by particles in the water. Many units also measure waves and water level.

How long should a metocean campaign last?

It depends on the purpose. Model calibration often needs at least one spring-neap tidal cycle, commonly 30 days or more. Seasonal effects such as the shamal or the south-west monsoon need longer records, and design criteria usually combine measurements with long-term hindcast data.

What is the difference between a wave buoy and a seabed-mounted ADCP for waves?

A surface buoy follows the waves and works in any depth, with real-time telemetry. A seabed ADCP is protected from vessel traffic and also records currents, but is best suited to shallower water and usually stores data internally unless cabled or linked acoustically.

Which water-quality parameters can be measured in real time?

Temperature, salinity, turbidity, dissolved oxygen, pH, chlorophyll and hydrocarbon indicators can be measured continuously by sensors and transmitted by cellular or satellite link. Nutrients are measured by in-situ analysers or by laboratory analysis of samples.

Related expertise